The Sunkean SK-TC is a 1500V DC copper-to-aluminium transition harness, rated up to 95 A at 85°C, that connects aluminium PV DC cable to the copper connections at modules, combiner boxes and inverters on C&I, LSS and solar farm projects. InverPower distributes the SK-TC in Malaysia as Sunkean's sole distributor, with pre-sales sizing support, after-sales service, warranty and RMA handling. The copper-to-aluminium joint is a solid-state friction weld made at the factory, sealed under a four-layer anti-corrosion coating and rated for 25 years of operation. The copper side is pre-assembled before shipment. On site, the aluminium conductor is brushed clean of its oxide layer and crimped into the aluminium tube, and the four nuts are tightened to the specified torque. Harnesses are made to length per order. WHAT'S INCLUDED
– 2 Cu-Al transition tubes with the copper side crimped and the aluminium tube under a dust cap – Male and female copper-side cables, pre-assembled with connectors – 2 PA66 connector housings and 4 PA66 locking nuts – 2 silicone rubber waterproof inner seals on the copper side – Aluminium cable is not part of the harness; it is crimped into the tube on site SPECIFICATIONS
Datasheet: SK-TC datasheet and installation instruction, available on request For project sizing and pricing, contact [email protected] COMPLIANCE & STANDARDS
|
The Sunkean SK-TC is a 1500V DC copper-to-aluminium transition harness, rated up to 95 A at 85°C, that connects aluminium PV DC cable to the copper connections at modules, combiner boxes and inverters on C&I, LSS and solar farm projects. InverPower distributes the SK-TC in Malaysia as Sunkean's sole distributor, with pre-sales sizing support, after-sales service, warranty and RMA handling. The copper-to-aluminium joint is a solid-state friction weld made at the factory, sealed under a four-layer anti-corrosion coating and rated for 25 years of operation. The copper side is pre-assembled before shipment. On site, the aluminium conductor is brushed clean of its oxide layer and crimped into the aluminium tube, and the four nuts are tightened to the specified torque. Harnesses are made to length per order. WHAT'S INCLUDED
– 2 Cu-Al transition tubes with the copper side crimped and the aluminium tube under a dust cap – Male and female copper-side cables, pre-assembled with connectors – 2 PA66 connector housings and 4 PA66 locking nuts – 2 silicone rubber waterproof inner seals on the copper side – Aluminium cable is not part of the harness; it is crimped into the tube on site SPECIFICATIONS
Datasheet: SK-TC datasheet and installation instruction, available on request For project sizing and pricing, contact [email protected] COMPLIANCE & STANDARDS
|
